12V to 60V/72V Boost Converter

12V 24V to 72V 90V 2A

Model Number: HY-B1290
Input Voltage: 12V 24V
Output Voltage: 90V
Output Current: 2A MAX
Product description: 12V 24V to 72V 90V 2A
INQUIRY

100W DC DC Converter 12V 24V to 72V 90V 2A Adjustable Step up Boost Power Supply Module

Model	HY-B1290
Module Properties	non-isolated step-up module (BOOST)
Input rated voltage	DC 12V
Input voltage range	DC 10-32V
Input Current	16A MAX (Please enhance heat dissipation if more than 10A)
Conversion efficiency	85% typical
Output voltage	DC 60-95V Adjustable
Output current	2A MAX
Output rated power	70W MAX natural cooling
Output peak power	100W MAX enhance heat dissipation
Voltage regulation	± 0.5%
Load regulation	< 2%
Working temperature	-40°c ~+85°c( If ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)
Output Ripple	2% (MAX) 20M-bandwidth
Rectification	synchronous rectification
Full load temperature rise:	45°c
No-load current	35mA typical
Dynamic response speed	5% 200uS
Protection	Over-current, Over-temperature
Short-circuit protection	NO, if need pls add fuse on the positive pole on input
Input Reverse Polarity Protection	None (Please Series diode at the input port.)
Connection	solderless terminal
Wiring	the above chart, .IN + input positive, IN- input negative, OUT + Output +, OUT- output negative.
Product Weight	70G
Product size	653723.5mm
Applications:	1) DIY an output adjustable car power supply, only need access to your 12V power input, the output voltage you can (60-95V) continuously adjustable freely, but the output voltage can not be less than the input voltage. 2) Boost charger, you can use more than 12V power supply for 12V battery charging, for example, 72V battery. 3) In order to power your electronic devices, as long as the voltage regulator to your desired voltage and current does not exceed the rated current can all be working. 4) Solar battery charger for electric vehicles
Attention	1. Within one meter lead wire length not less than 1.5 square feet, if greater than 1 m length wire, bold, recommended 2.5 to 4 square feet of line is better 2. The module operates at high power, high temperature, plus time to install the fan housing, low power without adding a fan, be sure the module heat sink temperature should not exceed 80 degrees. 3. Using the input can not be reversed output can not be shorted. 4.12V battery discharge voltage can not be lower than 10.5V, Li-ion battery used in tandem (single 3.7V) discharge voltage can not be lower than 2.7V.
Other output current option for 12V to 24V	1A, 2A, 3A, 5A, 8A ,10A, 12A, 15A(pls contact with our sales manager if need)
Attention: >Pls install according to the the label strictly,positive pole and nagative pole can’t be reversed, or the module and device might be damaged >To assure this converter has the sufficient voltage and power pls make sure the voltage and power input is enough.